Title

Home
Articles Search
Gear housing

Articles search results for Gear housing

Showing 1 to 20 of 57 articles

GEARBOX - Limited Slip Diffs; necessary parts for installation.

Fitting an LSD isn't as simple as replacing the diff cage unit. In all cases a certain degree of diff housing modifications is needed - material needing to be ground/filed away to provide clearance for larger diff housing cases and crown wheel bolts. Although it has to be said the Quaife diff is supposed to fit without these mods. I've never found that. The design and manufacture of the LSD to facilitate any other function other than that of a standard 'open' diff assembly precludes use of standard CWPs. So one suitable for an LSD is needed. Naturally Mini Spares/Mania supply these in an extensive range of FD ratios. The output shafts are also different. A much thicker spline type is used within the LSD assembly. Consequently a suitable pair of LSD-compatible output shafts are needed. Some folk still insist on running the archaic, power consuming Hardy-Spicer type driveshaft to diff joints - although this is the only real option for rallying unless a change in driveshaft assembly

Primary Gear - Bush Replacement

With the cost of new primary gears spiralling ever upwards, and the availability of good, serviceable used ones, fitting new bushes to existing gears is becoming a more common solution. For some reasons for bush failures and rectification to stop it re-occurring, see article Primary gear - Bush problems. Since there is no useful information given in any of the workshop or DIY manuals on this subject, following is my approach to dealing with the issue. The first thing to get to grips with is which bush is which. This has added an element of confusion to many conversations I have had with folks on this subject, so - the FRONT bush is the one nearest the engine block, the REAR bush is the top-hat one nearest the flywheel. This is because the front of the engine is actually the radiator end - quoted in 'in-line' engine-speak. The REAR bush is the same on all primary gears - be they for small or large bore engines. The FRONT bush is different for each though; the small-bore one is smaller

Idler Gear - Setting End Float

A fairly crucial part of how the idler gear operates is its tolerances and running clearances. part numbers: 22A1545, 22A1546, 22A1547, 22A1548, 22A1549, DAM4822, DAM4823, DAM4824, DAM4825, GUG705563GM, AAU8424, ADU6033, CCN110, 2A3643, 22A152, 53K547, Terminology: DTI - Dial Test Indicator End float is a continual problem as folk either ignore it through ignorance or lack of accessible information on how to do it, or belief special tools are needed. Also, later factory assembled engine units (from about 1992 onwards) were built up using whatever shims and thrust washers were available, since Rover were not making regular orders for all shim/washer sizes due to the forthcoming end of production. Consequently, many units left Rover with incorrect (usually too big) clearances. The idler gear was no exception. Too tight a clearance and the idler gear will either seize solid when it gets hot, or destroy the thrust washer thrust faces in the comparably soft aluminium gearbox and t

Primary Gear – Bush Problems

Although not of immediate interest to many road-runners/street-burners, mainly accorded to the racing scene, it seems to be a perplexing problem to a very large number of folk around the world, and has burned up plenty of telephone time.

part numbers: 13H2934, LUF10005, CE12, 22G109, DAM8889, DAM8887

The first thing to get to grips with is which bush ...

GEARBOX - Final Drives, standard

FDs are ultimately responsible for the way your Mini goes after engine, gearbox, and under carriage tweaking has been applied. part numbers: DAM3647, 22G443, 22G101, 22G340, 22G338, DAM4131, 22A399, DAM4162, 22G940, 22A399, DAM2677, DAM2679, 22A411, 22A413, DAM2808, DAM6327, DAM2808, TCC10001, Terminology - FD - Final Drive/diff ratio The aforementioned and the degree to which it has been done will affect the decision as to what FD is required. They’re also responsible for much discussion between many tuning freaks, and confusion to the less informed. There’s nothing weird or scientific about it. Maximum acceleration requires a low final drive, top speed a high one. And these two terms confuse most. The confusion being the LOWER number denotes a HIGHER gear. Likewise the higher number denotes a lower gear. Likewise the higher number denotes a lower gear. Largely because the lower the ratio, the slower you go and vice versa.

MSE6 - POST 1992 Unleaded Stag

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. Three-angle valve seats in head. Super-quality MG Metro valves modified to increase airflow. MSE6 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE6, TAM1059, TAM1061, TAM2069, 12G1963, 12G1015, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Original equipment type P/No. TAM1059 Exhaust Valves: 29.2mm(1.150") dia. Original equipment type P/No. TAM1061 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: AE Hepolite cast iron P/No. 12G1963 Valve Springs: Nominal 140lb. Max actual valve lift 0.400" P/No. 12G1015 Stem Seals : Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Combustion chamber volume used to give slight static compression ratio increase over

MSE6 - POST 1992 Unleaded Stag

MSE4 - Post 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE4 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE4, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves: 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: Magnesium bronze P/No. C-AEA526 Valve Springs: Nominal 180lb. Max actually valve lift 0.500" P/No. C-AJJ4037 Stem Seals: Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Three-angle valve seats in head. Cooper S size valves with current maximum flow profiles and Tuftrided for durability/longevity when used with unleaded fuel (hence 'black' finish).

MSE4 - Post 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE4 - POST 1992 unleaded stage 2 (Road Rocket) large-bore head Part No Applications: MSE4, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves: 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves: 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats: Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides: Magnesium bronze P/No. C-AEA526 Valve Springs: Nominal 180lb. Max actually valve lift 0.500" P/No. C-AJJ4037 Stem Seals: Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume: Nominal 20cc Three-angle valve seats in head. Cooper S size valves with current maximum flow profiles and Tuftrided for durability/longevity when used with unleaded fuel (hence 'black' finish).

MSE3 -Pre 1992

Modified to give maximum performance gain for cost. Combustion chambers, inlet and exhaust ports extensively re-worked. Stone-ground finish in ports promotes ultimate fuel atomisation. MSE3 - PRE 1992 unleaded Stage 2 (Road Rocket) large-bore head Part No Applications: MSE3, C-AEG544, C-AEG106, TAM2069, C-AJJ4037, C-AEA526, ADU4905 Inlet Valves 35.6mm(1.401") dia. Tuftrided EN214N s/steel P/No. C-AEG544 Exhaust Valves 29.5mm(1.161") dia. Tuftrided EN214N s/steel P/No. C-AEG106 Exhaust seats Latest type Beryllium-based for lead-free fuel P/No. TAM2069 Valve Guides Magnesium bronze P/No. C-AJJ4037 Valve Springs Nominal 180lb. Max actually valve lift 0.500" P/No. C-AEA526 Stem Seals Latest 'top-hat' design with tensioner springs (inlets) P/No. ADU4905 Chamber Volume Nominal 20cc

Engine - Identification Data Updated

If you have the engine tag still attached to the engine - just in front/below the thermostat housing - or perhaps the original engine number in the log book then the following should help you determine which engine you have. For Metro units, see 'Engine - Metro identification data'. Original engine identification numbers 850cc 8A Austin up to 25000 8MB Morris up to 25000 8AM Austin & Morris 25000 onwards 8AH Austin & Morris Automatic 8AJ Austin & Morris closed circuit breathing 8AK Austin & Morris automatic with closed circuit breathing 8WR Wolseley Hornet & Riley Elf 8AC Moke 85H/101 All variants 1969 onwards Note: third suffix letter denotes compression type, L = Low, H = High, e.g. 8AM/U/H101 denotes high compression. 998cc 9WR Wolseley Hornet & Riley Elf Mk2, pre closed circuit breathing 9AD Austin, Wolseley Hornet & Riley Elf Mk2 with remote type gearbox and closed

‘Salisbury’ is the word banded about by most un-enlightened folk when discussing LSDs for Minis, mistakenly believing the word covers all Mini orientated LSDs. This is grossly incorrect. Terminology - LSD - Limited Slip Differential The ‘Salisbury’ was designed in the ‘50s at a time when racecars were a good deal less sophisticated than today. Tyres were usually cross-ply with severely limited grip due to poor compounds developed ostensibly for rear-wheel-drive cars; the front wheel drive of the Mini being a rarity. And tracks were more than a little ‘bumpy’. Agriculturally built cars needed an LSD designed along similar lines; enter the Salisbury - effectively developed from a tractor diff. High static pre-loads were more than common to help compensate for severe short-falls in chassis, suspension, and tyre design. To all intents and purposes the diff was practically locked up, making the car a real beast to drive.

Thread Locking Compounds - Application

This is the frequently abused and mis-used stuff dolloped on to bolts/nuts to stop them coming undone. Having seen and heard of many horror stories concerning this stuff, I thought a few words of caution and common sense wouldn't go amiss.

There is a plethora of types on the market with no easy reference as to which to use for what application except in certain cases. Loctite have a very useful guide, their dealers generally able to help with choosing which is best for any given application. The trouble comes when folk buy stuff unwittingly from their local 'do it all' motorist/car spares place. Good stuff is expensive, and it doesn't go all that far. But at least it does its job when used in the correct applications. Unfortunately many buy a cheaper variety with not quite the same application strength, and then apply twice as much hoping it will do the job. It doesn't.

Thread Locking Compounds - Application

The first Minis rolled off the production line with a three-syncro gearbox, first gear as explained earlier was still a hit and miss affair.

Terminology -
FD - Final Drive

NOTE; A 'high' or 'low' ratio gear is in reference to it's performance, not it's numerical number. To illustrate - a 'high' FD ratio will give 'higher road speed', but will have a numerically low figure. A 'low' FD ratio will give lower road speed, but have a numerically high figure. A by-product of this will be reduced acceleration capability on the 'high' ratio, increased acceleration capability on the 'low' ratio. The main gearbox gears work in the exact same way.

I’m sure we’re all aware of Sir Alec Issigonis’ brilliant solution to the gearbox location in the Mini - just fold it up underneath the engine, simple. Following is a résumé of the production gearboxes to date.

GEARBOX - How they work

Having decided on or even implemented a course of action to bolster the performance of your Mini’s engine, maximising it’s potential should encompass a good look at the gearbox.

GEARBOX - How they work

Having decided on or even implemented a course of action to bolster the performance of your Mini’s engine, maximising it’s potential should encompass a good look at the gearbox.

Engine - 998 tuning, further options

Following on from the easily bolted on performance enhancing components out-lined in the stage one section, we need to consider where to go to get more power output.

Terminology:
MSC/MM - Mini Spares Centre/Mini Mania
BBU - Big Bore Unit (refers to all 1275cc-based units)
SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998)
BHP - Brake Horse Power
CR - Compression Ratio

To improve engine out-put, you need to increase the engine's 'breathing' ability. The stage one kit deals with all the easily bolted-on external parts, and represents the best increase for investment. From here on in the power increases will cost commensurately more money. Power production of any engine, once the 'breathing apparatus' (induction/exhaust system) has been dealt with to cause no restriction ...

Engine - Identification data

What they don’t tell you in the manual! Terminology - FD - Final Drive (diff ratio) What they don’t tell you in the manual! If you’ve decided the FD fitted isn’t what you want, changing the FD is possible without separating the engine from the gearbox. Removing the diff case will allow you access to the diff assembly to change the crown-wheel, and access to the gear-change linkage. Use a manual for crown-wheel replacement. While you’re in there it would be just as well to replace the thrust washers and diff-pin as these are the source of many a gearbox problem. Particularly for up-rated engines where fitment for the competition diff-pin is highly recommended. Once again, follow the manual here. Now the bit they don’t tell you how to do... Rod-change types - Removal of the speedo drive housing gives access to the pinion retaining nut (1.5”AF socket needed and a long bar). To be able to undo the pinion nut (torqued up to 150lb ft !!) you need to engage two gears - 2nd and 4th - t

Articles search results for Gear housing

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals